Skip to main content
PermitBridge

Electrician License: New York → Texas

A step-by-step breakdown of what it takes for a licensed electrician in New York to become licensed in Texas, based on Texas's current no reciprocity — standard texas journeyman route rules.

No Reciprocity — Standard Texas Journeyman Route
Source: Texas Department of Licensing and Regulation (TDLR) ↗
Updated October 1, 2026

Portability Score

26/100

Difficult Transfer

PermitBridge's own estimate, based on the exam, fee, and processing-time factors below — not an official government rating.

Exam
Required
Processing
Processing time not published by the board
Fee
$108
Extra Hours
None

Step-by-Step Process

  1. 1

    TDLR's out-of-state page lists Texas's reciprocity states. New York is on neither list: Journeyman (Alabama, Alaska, Arkansas, Idaho, Iowa, Nebraska, New Mexico, Oklahoma, South Dakota and Wyoming) or Master (Alabama, Arkansas, Iowa, Louisiana, Nebraska, North Carolina and Ohio). TDLR adds: "Currently there are no reciprocal licensing agreements for any other license types."

  2. 2

    Without reciprocity, you apply through Texas's standard Journeyman Electrician route. TDLR requires at least 7,000 hours of on-the-job training under the supervision of a Master Electrician licensed in Texas to take the exam, and 8,000 hours for licensure, documented on TDLR's Experience Verification Form.

  3. 3

    Whether TDLR credits experience gained in New York toward those hours is not stated on TDLR's Journeyman page. Ask TDLR before you plan around it.

  4. 4

    Pay TDLR's non-refundable $30 Journeyman application fee.

  5. 5

    Pass the Journeyman Electrician exam administered by PSI. The exam fee is $78, per PSI's TDLR Electrician Candidate Information Bulletin, which TDLR's exam page links to.

  6. 6

    Await processing. TDLR does not publish a processing timeline on its out-of-state licensing page.

Note: Rewritten 2026-10-01 from TDLR's own pages, replacing earlier generator template steps ($235 fee, 32 training hours) that contradicted the $108 total. Sources: reciprocity lists and license fees from TDLR's out-of-state page (https://www.tdlr.texas.gov/electricians/out-of-state.htm). Hours requirement and $30 application fee from TDLR's Journeyman Electrician page (https://www.tdlr.texas.gov/electricians/apply/individuals/journeyman-electrician.htm). $78 exam fee from PSI's TDLR Electrician Candidate Information Bulletin (https://test-takers.psiexams.com/api/content/bulletin/1682), linked from TDLR's exam page. $108 = $30 + $78. This page covers the Journeyman license only; Master requirements for non-reciprocal applicants were not researched for this record. No figure for crediting out-of-state experience is published, so none is assumed.

Electrician Transfers From New York to Other States

StatePathwayExam?ScoreLink
CaliforniaFull New Application RequiredYes21View
FloridaUniversal License Recognition (Endorsement)No76View
OhioUniversal License Recognition (Endorsement)Yes50View

Frequently Asked Questions About This Transfer

Can I transfer my electrician license from New York to Texas?+

Yes, via no reciprocity — standard texas journeyman route. You will need to pass Texas Journeyman Electrician exam (PSI). The licensing board does not publish a processing time.

How much does it cost to transfer a electrician license to Texas?+

Budget approximately $108 for the Texas application fee alone. Exam fees, if required, and any additional continuing-education hours are typically separate costs charged by third-party providers.

Can I use my electrician license in another state?+

In most cases you cannot simply use an out-of-state license as-is. You typically need to apply for licensure by reciprocity or endorsement in the new state, which may waive the trade exam but almost always requires a state-specific business and law exam.